Shuttle KD22 Bedienungsanleitung PDF herunterladen (Seite 28)

English

2-10

connectinG tHe oMninas GettinG started

The HDD LEDs for any installed HDDs also light. See LED Denitions for further information.

HDD LEDs

Note:

In the event of failure or improperly installed HDDs, the HDD LEDs blink red. Additionally,

the Web Interface displays a power off message, see the following.

Displaying HDD Failure

The OMNINAS is now ready for setup and conguration. Connect the system to your network by

using the Finder Utility.

Connecting Your OMNINAS

After setting up the hardware and connecting the ethernet port, you will need to congure and

initialize the type of mode to use. To get you started quickly and easily, the OMNINAS Finder util-

ity (Windows and Mac users only) is provided so you can quickly connect your OMNINAS. Linux

users proceed to Connecting by Web Browser.

Before you get started make sure your OMNINAS device is connected to a DHCP enabled router.

By default, your device’s network settings are cogured to obtain an IP address from a DHCP

router. If the device is not connected to a DHCP router, the Finder utility may not be able to de-

tect your OMNINAS device within your network.

Once a device is detected, information from your OMNINAS, such as: Domain name, IPv4 ad-

dress, Mac address and rmware version is displayed on the main page.

The Finder Utility is available on the provided CD or for download from the following location:

http://global.shuttle.com/download/download

Note:

Linux users connect to the OMNINAS interface through the web browser and not the Finder

utility. Proceed to Connecting by Web Browser.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 169 170

Keine Kommentare

Shuttle KD22 Bedienungsanleitung Seite 28